DAX LIFTER DXTT92-FB self-propelled vertical mast boom lift is a compact electric aerial work platform built for confined-space indoor aerial maintenance, featuring 11.2m maximum working height, 9.2m maximum platform height, 200kg loading capacity, 3m maximum horizontal reach and 7.89m up and over height. The guardrail height reaches 1.1m; overall dimension is 2.53m(L) ×1.0m(W) ×1.99m(H), platform size 0.62m×0.87m×1.1m. The stowed ground clearance is 70mm while raised ground clearance is 19mm, wheel base 1.22m, inner turning radius 0.23m and outer turning radius 1.65m. Equipped with 24V/240Ah battery, 24V/30A charger, 24VDC/0.9kW drive motors and 24VDC/3kW lifting motor, the whole machine weighs 2950kg. Travel speed reaches 4.5km/h when stowed and 0.5km/h in raised status; lifting up/down time is 42/38 seconds, drive wheel size Φ381×127mm. As a narrow aisle man lift, this electric telescopic mast aerial platform supports self-driving operation at height, widely adopted for factory equipment maintenance, shopping mall decoration, exhibition setup, warehouse piping installation, office ceiling repair and indoor cleaning jobs.

This compact vertical mast man lift adopts full electric hydraulic drive system with zero emission, suitable for indoor environments with strict environmental requirements. Ultra-narrow 1.0m overall width enables easy passage through standard doorways and freight elevators. Small inner turning radius delivers flexible steering in narrow aisles, corridors and compact workshops. The extendable jib boom offers horizontal outreach and up-and-over capability to bypass obstacles, solving difficult aerial access challenges that traditional vertical mast lifts cannot handle. All control panels adopt proportional hydraulic control for smooth lifting, rotating and travelling movements. Multiple safety configurations including tilt protection, overload cut-off system, emergency lowering valve and anti-collision design guarantee operator safety during aerial operations.

Compared with large articulating boom lifts and scissor lifts, this self propelled mast boom lift occupies smaller floor space and requires no supporting outriggers, greatly saving preparation time before operation. Low noise battery power system meets commercial building noise control standards. The detachable safety guardrail makes transportation and entry into small spaces more convenient. DAX LIFTER vertical telescopic boom man lift has become a preferred aerial equipment choice for aerial rental companies, facility management contractors, interior fit-out enterprises and industrial manufacturing factories across Europe, Southeast Asia, Middle East and North America.

Core Advantages

• Compact narrow body design: overall width only 1 meter, freely pass standard indoor doorways
• Self-propelled driving with drive-at-height function, no manual pushing required
• Telescopic jib with up-and-over performance to work around barriers
• Battery powered fully electric drive, low noise, zero exhaust pollution for indoor use
• Multiple built-in safety interlocks, overload and tilt protection system
• Small turning radius, flexible maneuvering inside warehouses, malls and office buildings

Application Scenarios

Indoor facility maintenance, ceiling light replacement, HVAC piping installation, exhibition booth construction, shopping mall renovation, warehouse equipment servicing, airport terminal maintenance, hotel interior decoration, factory workshop overhead pipeline inspection.

Technical Data